RIEGER overflow valves ÜS open at the set response pressure and thus prevent undesirable overpressure in pipelines. They are available with welding ends as well as with milk pipe fittings or clamp connectors.
One possible application is the protection of forced feed pumps (e.g. peristaltic pumps).
The ÜS overflow valve is suitable for all liquid media.
Overflow valves are not safety valves.
We recommend the TÜV-certified safety valve type SH for this purpose.
Material | product touched optional not in contact with the product |
1.4404/AISI316L 1.4435/AISI316L 1.4301/AISI304 |
|
Seals | O-rings/seals | EPDM, FKM (others on request) |
|
Temperatures | maximum | EPDM | |
Continuous operating temperature
Sterilizing |
130 °C*
150 °C* |
||
Setting range of the Valves |
Please specify setting point, as one spring cannot cover the entire adjustment range. |
0.5 bar – 6 bar
higher pressures |
|
Adjustment range of the compression spring | Depending on customer requirements in the lower or upper pressure range |
||
Surfaces | product touched optional not in contact with the product |
Ra ≤ 0.8 µm e-polished, other surfaces on request Ra ≤ 1.6 µm |
|
Connections Standard Pipe classes |
DIN 11850-R2 (DIN 11866 A) O.D. tube (DIN 11866 C) Clamp sockets in DIN and inch |
Structure of the valve | Solid valve body
No dead spaces completely idle Many installation positions possible |
Absolute product protection | Complete separation from the environment
no swamp, no cathedral |
Service friendliness | Gasket replacement without special tools
Short downtimes Optimal to clean |
Economic efficiency | Standard gaskets
Minimal maintenance costs |
Not available for this article.
All valves are available in special materials such as Hastelloy® C-22, 1.4539/904L, 1.4529, AL-6XN® and others .
Please contact us directly:
sales@rr-rieger.de
Phone: +49 7361 5702-0